On the touchpad:

1. Press  then 2
2. Login as Administrator
3. Place finger on the fingerprint sensor to Add Owner or 2 to Add Visitor

On the touchpad:

1. Press then 3
2. Login as Administrator
3. Press 1 to Delete All Owners or 0 to Delete All Visitors

You can delete individual users in the SECURAM GUARD app. 

On the touchpad:

1. Press then 6
2. Press 6 to adjust volume  (High / Low / Off)
3. Press ✔ to set

The SECURAM EOS uses 4x AA batteries to operate. 

1. First slide the battery cover off. 
2. Remove the spent AA batteries.
3. Insert 4 new AA batteries and slide the cover back on. 

The SECURAM EOS will say, “Welcome!” if the batteries are installed properly. 

On the touchpad:

1. Press  then 8
2. Login as Administrator
3. The wireless icon on the touchpad will flash blue, indicating it is ready to pair. 
4. Follow the pair process in the SECURAM Guard app.

• On the touchpad, press the lock button or press any button except (when unlocked)
• In the SECURAM Guard app, tap the lock icon on home screen or device page

• On the touchpad:
  • Enter code
  • Scan fingerprint
  • Use key
• In the SECURAM Guard app, tap unlock then enter a valid code (includes one time access code)

On the touchpad:

1. Press then 0

• Depending on the system status it will be Armed or Disarmed.
• When arming the system, you will be prompted to login as administrator.

1. Slide the battery cover off and locate the RED reset button.
2. Press and hold the reset button until the lock reports: “Reset to factory default.”

Performing a factory reset will delete all user fingerprints and codes. The default administrator code will be reset to 1 2 3 4 5 6.

1. Slide the battery cover off and locate the RED reset button. 
2. Tap the reset button once. The lock will beep twice, indicating a successful sync.