Lock Body Compatibility
Is your safe compatible with the SECURAM Wi-Fi Safe Lock? Quickly check below to choose the best installation option for your setup.
Three Ways to Upgrade
SECURAM Wi-Fi Safe Lock integrates with your existing system in three ways. Each option differs slightly in installation and system features.
|
Option |
Product Needed |
Installation |
Reset Required |
Users & Codes |
App Features |
|
Option 1 |
EntryPad only |
Replace EntryPad |
Not needed |
Same as before |
Yes |
|
Option 2 |
EntryPad only |
Replace EntryPad + system reset |
Needed |
Resets to 1 Manager + 9 Users |
Yes |
|
Option 3 |
EntryPad & Lock Body |
Replace EntryPad and Lock Body |
Not needed |
1 Manager + 9 Users |
Yes |
Compatible SECURAM Lock Bodies
Options 1 and 2 require an existing supported SECURAM Lock Body. Option 3 includes a new Lock Body for universal fit.
|
Lock Body Model |
Manufacture Date |
Option Supported |
|
EL-0601 |
After July 2018 |
Options 1 & 2 |
|
EL-0601-1M-2U |
After July 2018 |
Options 1 & 2 |
|
EL-0601-BM |
After July 2018 |
Options 1 & 2 |
|
EL-0601-S |
After July 2018 |
Options 1 & 2 |
|
EL-0601-S (Purchased as Kit) |
Any |
Option 3 |
Lock bodies from other brands are not compatible.
Installation Notes
- For Options 1 and 2, replace EntryPad only.
- For Option 3, replace both EntryPad and Lock Body.
- Reset is required only for Option 2 to enable full features.
- Professional installation is recommended for replacing Lock Body components.
Reset Procedure (Option 2 Only)
- Open safe door with a valid code.
- Locate and press the Reset button on Lock Body.
- Remove old EntryPad and install battery on new Wi-Fi EntryPad.
- Hold Reset button while connecting the cable.
- Release after 6 seconds.
- Remove and reinstall battery, then test using default code.
It is recommended to reset and test before final installation.
Important Notes
- For Options 1 and 2, confirm your Lock Body is supported before installation.
- Option 1 can be switched to Option 2 by performing a system reset.
- Under Options 2 and 3, the system resets to 1 Manager User + 9 Users configuration.
How to Confirm Your Lock’s Manufacture Date
Find the silver or blue barcode label located on the back of your EntryPad or Lock Body. The manufacture date is embedded in the barcode as YYMMDD (year, month, day).
Note: You may need to remove the EntryPad or access the Lock Body inside the safe door to locate this barcode.